How do I connect the bluetooth remote?
Mobile phones recognize the remote as a bluetooth keyboard, and often will not allow you to type when turned on. It is important to follow these steps so that the remote will connect and work.
Here is a link to the recommended remote on Amazon
1. Turn on your bluetooth remote (AB Shutter 3)
2. It will flash blue
3. Open 'Settings' on your mobile phone, select 'Bluetooth', and search for 'AB Shutter 3'
4. It will say 'Not Connected', click and Connect.
5. Once your remote is connected, TURN OFF THE REMOTE.
6. Open tagupCam and set up your game as you normally would.
7. Click the sub-menu, the 3 small dots in the upper right hand corner.
8. Click 'Settings', and scroll down to 'tagupDirector' and enable.
9. Click the 'Back' button, NOT the 'Home' button.
10. If you have done everything correctly, you will see a new UI on your phone screen.
iOS
Click once to start, once to stop
To 'End at Bat' either double click quickly, or hold for 2 seconds.
When successful, you will see a green check mark on the screen
Android
Click once to start, once to stop
To 'End at Bat' hold for 2 seconds. (double clicking is not available on Android)
When successful, you will see a green check mark on the screen
Common Issues/Tips
If the remote has previously been connected to another phone, make sure you 'forget device' on that phone.
Starting or stopping seems delayed. This is usually a sign that you need a new battery.
Stay within 10 feet of phone. Occasionally view phone to ensure record button is flashing, and you see the green check mark after 'End at Bat'